*Metric FAL Parts List*
By serger
 

  1. Barrel
  2. Flashhider
  3. Flashhider nut
  4. Flashhider screw
  5. Front sling swivel band
  6. Front sling swivel
  7. Front sling swivel
  8. Gas Block
  9. Gas Plug Assembly
  10. Front Sight Spring
  11. Front Sight Fixing Plate
  12. Front Sight
  13. Gas Block Retaining Pin
  14. Gas Tube retaining Pin
  15. Gas Regulator Spring
  16. Gas Regulator
  17. Gas Tube
  18. Gas Tube Nut
  19. Gas Piston
  20. Gas Piston Spring
  21. Left Hand Guard
  22. Right Hand Guard
  23. Hand Guard Assembly Cap
  24. Rat Tail Rivet
  25. Rat Tail Spring Plunger
  26. Hand Guard Screw Retainer
  27. Hand Guard Screw Washer
  28. Hand Guard Screw
  29. Upper Receiver
  30. Locking Shoulder
  31. Ejector
  32. Ejector Block Pin
  33. Bolt Carrier
  34. Rat Tail Spring
  35. Top Cover
  36. Bolt
  37. Firing Pin
  38. Firing Pin Spring
  39. Firing Pin Retaining
  40. Extractor
  41. Extractor Plunger
  42. Extractor Spring and Buffer
  43. (Locking shoulder inch pattern only, not shown)
  44. Rat Tail
  45. Rear Sling Swivel Assembly
  46. Cocking Handle
  47. Cocking Handle Knob
  48. Cocking Handle Knob Rivet
  49. Cocking Handle Stop Lug
  50. Cocking Handle Plunger
  51. Cocking Handle Spring
  52. Cocking Handle Stop Pin
  53. Bolt Hold Open
  54. Bolt Hold Open , Magazine Release Retainer Screw
  55. Bolt Hold Open Actuator
  56. Bolt Hold Open Actuator Pin
  57. Bolt Hold Open Return Spring
  58. Bolt Hold Open Plunger
  59. Magazine Release
  60. Magazine Release Spring
  61. Trigger Frame
  62. Joint Pin, Left
  63. Joint Pin Right
  64. Trigger
  65. Trigger Plunger
  66. Trigger Plunger Spring
  67. Sear
  68. Sear Plunger
  69. Sear Plunger Spring
  70. Frame Locking Plate
  71. Frame locking Lever
  72. Frame Lock
  73. Frame Lock Retaining Pin
  74. Frame Lock Spring
  75. Frame Lock Plunger
  76. Selector
  77. Selector Spring Retaining Pin
  78. Selector Spring
  79. Selector Detent
  80. Trigger and Sear Axis Pin
  81. Frame Lock Retaining Screw
  82. Hammer
  83. Hammer Plunger
  84. Hammer Spring
  85. Hammer Spring Retainer
  86. Hammer Axis Pin
  87. Pistol Grip
  88. Trigger Guard
  89. Pistol Grip Screw
  90. Butt Stock
  91. Sling Swivel screw
  92. Return Spring Tube
  93. Butt Stock Washer
  94. Butt Stock Screw
  95. Butt Plate Washer
  96. Butt Plate Screw
  97. Return Spring Plunger
  98. Return Spring Outer
  99. Return Spring Inner
  100. Butt Plate
107. Back Sight Base

108. Back Sight Screws

109. Back Sight "S" Spring

110. Back Sight Aperture

111. Back Sight spring

112. Back Sight Push Button

113 thru 116 carrying handle assembly

117. Magazine Body

118. Magazine Floor Plate

119. Magazine Follower

120. Magazine Spring
 
 

serger

All materials at this site not otherwise credited are Copyright (c) 1996-2002 Trip Williams. All rights reserved. May be reproduced for personal use only. Use of any material contained herein is subject to stated terms or written permission.